Owner's manual

GX-2003 Operator’s Manual About this Manual • 4
About this Manual
The GX-2003 Operator’s Manual uses the following conventions for
notes, cautions, and warnings.
NOTE: Describes additional or critical information.
CAUTION:Describes potential damage to equipment.
WARNING: Describes potential danger that can result in injury or
death.
Safety/
Regulatory
C US
186718
CSA classified, “C/US”, as Intrinsically Safe. Exia. Class I, Groups A, B, C, &
D. Temperature Code T3C.
Power
Supply
• Three AA size alkaline batteries standard
• Ni-MH Battery Pack (3.6 VDC Nominal) optional, Direct Charging
Continuous
Operating
Hours
@ 25 °C
• Alkaline Batteries: 14 Hours (Non Alarm Operation, Fully Charged)
• Ni-MH Battery Pack: 16 Hours (Non alarm Operation, Fully Charged)
Case High-impact Plastic, RF Shielded, Dust and Weather Proof
Standard
Accessories
• 10 foot hose
• 10 inch probe
• Flexible 4 inch tapered rubber nozzle
• Protective rubber boot
Optional
Accessories
• 115 VAC Charging Station
• 12 VDC Charging Station
• Data Logging Software
• IrDA/Serial or IrDA/USB Cable for Downloading Data to a Computer With
Data Logging Software (not needed if computer has an infrared port)
• Communication Software (Windows
®
98, 2000, & XP)
• Automatic Calibration Station & Software
• Bar Hole Probe
Dimensions
and Weight
Approximately 171(H) x 65(W) x 39(D) mm (5.6”H x 2.5”W x 1.5”D)
Approximately 310 g (11 oz.)