Manual

3 • Model GD-70D4S-XX Sample Draw Transmitter
Strobe
A NEMA 4X amber strobe is mounted on the top right side of the enclosure. It is factory
wired to the alarm 1 relay terminals on the GD-70D and the 24 VDC output of the power
supply so that it turns on during an alarm 1 condition.
Figure 1: Component Location
Figure 2: Inlet Fitting with Tubing Stub
Power Supply
Strobe
GD-70D Detector
GNH
100-240 VAC
AC in Terminal
NEMA 4X Enclosure
(Cover not shown)
Exhaust Fitting
3/4" Conduit
Hub, 2X
Tubing Stub
Inlet Fitting
Front Farrule
1/4" Teflon Tube
O-ring
Nut
1/4" Teflon Tube
Back Farrule
Fitting Body