Manual

Gas Tracer Operator’s Manual Display Mode • 45

2. Once the warm up sequence is complete, the Normal Operation

Screen will display and INERT will appear along the bottom of the

display.

3. Since the oxygen concentration in fresh air is above both oxygen

alarm points, the Gas Tracer will go into alarm if turned on in a

fresh air environment.

Display Mode

This section describes using the Gas Tracer in Display Mode. With the

Gas Tracer in Display Mode, you can:

• set the combustible gas channel range

• display peak readings

• display STEL and TWA readings (CO only)

• display full scale, warning, alarm, STEL (CO only), and TWA (CO

only) values

• display time in operation

• display the date and time

• display remaining log time

• clear the data logger

• turn the pump on or off

• select a user ID

• select a station ID

• display snap logging data

• turn peak bar function on or off

To enter Display Mode, press and release the DISPLAY (ADJ) button

while in Measuring Mode. To scroll from one screen to the next press

and release the DISPLAY (ADJ) button.

20.9

%LEL

ppm

CH4

INERT