Owner's manual

10,000 ppm Gas Tracer Operator’s Manual Using Maintenance Mode • 68
Updating the Alarm Silence Setting
The Alarm Silence Setting does not have any effect on the operation of
the Gas Tracer.
Updating the Data Log Interval Setting
The Gas Tracer does not log operational data. The Data Log Interval
Setting has no effect on the Gas Tracer.
Updating the Alarm Point Settings
The ALARM--P menu item is not functionally available in the Gas
Tracer but will still appear in the Maintenance Mode menu.
Turning the Clear Data Logger Screen On or Off
The DLOG DSP menu item does not have any effect on the Gas
Tracer.
Turning the Bump Test Function On or Off
The BUMP DSP menu item is used to turn the bump test function on
or off. If set to OFF, the BUMP menu item in Calibration Mode and
Maintenance Mode does not appear. In addition, the BUMP--SET, BP
INTVL, BP RMNDR, and BP EXPRD menu items will not display in
Maintenance Mode. The factory setting is OFF.
1. Use the AIR▲ or (SHIFT)▼ buttons to display the BUMP DSP
menu item.
2. Press and release the POWER ENTER button. The screen will
indicate the current setting.
3. Use the AIR▲ or (SHIFT)▼ button to display the desired setting.
MAINTENANCE
BUMP DSP
On
MAINTENANCE
BUMP DSP