Owner's manual

21 • Start Up 10,000 ppm Gas Tracer Operator’s Manual
9. The display then indicates the detection units and then the full
scale values for the ppm channel.
10.The Gas Tracer will then continue its warm up.
11.If the Gas Tracer experiences a sensor failure during start up, a
screen indicating the sensor failure displays.
If the ppm sensor fails, the Gas Tracer cannot be used. Use the
POWER ENTER button to turn the Gas Tracer off. Replace the
failed sensor as soon as possible.
CH4
ppm
CH4
9990
ppm
CH4
F.S.
15
sec
WARM UP
FAIL
ppm
CH4
SENSOR