User Manual

Eclipse Detector Head Operator’s Manual 3
About the Eclipse Detector Head
The Eclipse Detector Head is a fixed mounted, continuous-monitoring detector head. All
user adjustable parameters may be adjusted non-intrusively by use of an optical switch
which is accessible through a window at the front face of the detector head.
The Eclipse displays the current gas reading on an LCD display which is visible through
the window in the cover (front face). It also provides a 4 - 20 mA signal which indicates
the target gas reading for use by a recording device, gas monitor controller, or
programmable controller.
Specifications
Table 1 lists specifications for the Eclipse.
Table 1: Specifications
Target Gas/Detection Range Combustible Gas: 0 - 100% LEL, 1% LEL increments
Oxygen: 0 - 25% volume, 0.1% increments
Carbon Monoxide: 0 - 300 ppm, 1 ppm increments
Hydrogen Sulfide: 0 - 100 ppm, 0.5 ppm increments
Construction (housing) Explosion-proof Junction Box
Area Classification Explosion-proof for Class I, Groups B, C, and D
Sampling Method Diffusion
Input Power 24 VDC
Controls Optical Switch (operated at front face)
Weight 4.5 lbs.
Signal Output 4 to 20 mA