Manual

Beacon 200 Rig Monitor Operator’s Manual • 48
Parts List
Table 10 lists the part numbers and descriptions for replacement parts and
accessories offered for the Beacon 200 Rig Monitor.
Table 10: Parts List, Beacon 200 Rig Monitor
Part No. Description
06-1248RK-03 Sample tubing for calibration, 3 foot length
07-0033RK Detector housing cap gasket for H
2
S detector
07-0203RK Rubber retaining boot for H
2
S sensor
14-2101RK Spacer between H
2
S sensor and rubber boot
18-0061RK Cable bushing
18-0107RK Conduit Hub (3/4 in.)
18-0400RK-01 Junction box with rubber spacers
43-0440RK Reset Switch
43-4155RK Fuse, 1/4” x 1 1/4”, fast acting, 3A, 250 V
51-0096RK Strobe/horn, 10-33 VDC, NEMA 4X
52-1016RK Buzzer
61-0140RK-01 Replacement LEL detector
65-2427RK-05 H
2
S sensor with j-box (does not include cable and cable bushing)
65-2428 H
2
S detector (with plug-in sensor)
71-0243RK Combustible Gas and Hydrogen Sulfide Beacon 200 Rig Monitor Operator’s Manual (this
document)
81-0012RK-01 Calibration cylinder, 50% LEL methane in air, 34 liter steel
81-0012RK-03 Calibration cylinder, 50% LEL methane in air, 103 liter steel
81-0076RK Zero air calibration cylinder, 17 liter steel
81-0076RK-01 Zero air calibration cylinder, 34 liter steel
81-0076RK-03 Zero air calibration cylinder, 103 liter steel
81-0151RK-02 Calibration cylinder, 25 PPM H
2
S in nitrogen, 58 liter aluminum
81-0151RK-04 Calibration cylinder, 25 PPM H
2
S in nitrogen, 34 liter aluminum
81-1050RK Regulator with gauge and knob, 0.5 LPM, for 17 liter and 34 liter steel calibration cylinders
81-1051RK Regulator with gauge and knob, 0.5 LPM , for 34AL/58/103 liter calibration cylinders
81-1112RK-01 Calibration cup with diffuser holes for LEL detector
81-1116RK Calibration cup/splash guard for H
2
S detector