User Manual

25 • PID Sensor Tab
While the pre-defined gases may not be edited, the 1 user-defined gas
may be edited by doing the following:
1. With Maintenance Data Loader Program running, click on the PID
Sensor tab and then click on the High Range tab.
1.00-1.99 50.00 0.02
2.00-2.99 100.0 0.1
3.00-3.99 150.0 0.1
4.00-5.99 200.0 0.1
6.00-7.99 300.0 0.2
8.00-9.99 400.0 0.2
10.00 500.0 0.2
Table 2: Low Range PID
Factor
Full Scale
(ppm)
Increment
Figure 17: High Range Tab