Manual

65-2451RK-04 Hydrogen Transmitter • 5

Figure 2: Mounting the Hydrogen Transmitter

2. At the monitoring site you select, hang or mount the detector junction box with the

detector facing down (see Figure 2).

3. Install 3/16 inch I.D. flexible polyurethane tubing to the fitting at the bottom of the

calibration cup/splash guard and route it to an accessible area that is close to the

amplifier junction box. See the “Parts List” on page 19 for available tubing.

.382.70

Rubber

Spacer

J-Box

3/4 NPT

Female

3.65

Hydrogen

Detector

10.30 MAX

Calibration

Cup/Splash

Guard

5.25

1.13