Owner's manual

65-2405RK-03 Combustible Gas Transmitter • 5

Figure 2: Mounting the Combustible Gas Transmitter

2. At the monitoring site you select, hang or mount the detector junction box with the

detector facing down (see Figure 2).

3. Install 3/16 inch I.D. flexible polyurethane tubing to the fitting at the bottom of the

calibration adapter and route it to an accessible area that is close to the amplifier

junction box. See the “Parts List” on page 19 for available tubing.

3/4 NPT

Conduit Hub

Ø3.65

2.70 .38

9.25 Max

5.25

Rubber

Spacer

1.13

Calibration

Adapter

Combustible

Gas

Detector