Owner's manual

65-2322RKSS Oxygen Transmitter • 7
Figure 4: Wiring the Oxygen Transmitter to a Controller
12. If shielded cable is used, connect the cable’s drain wire to an available chassis (earth)
ground at the controller. RKI controllers typically have a ground stud that can be used
to ground the cable’s drain wire.
+
S
Cable Shield
Controller Housing
Controller Detector/Transmitter
Terminals, Ty pic al D esig nat ion s
SIG /PW R T OX I C OX Y ZE RO SPAN
S
Oxygen Detector
J-Box
White
Green