User Manual

65-2322RK Oxygen Transmitter • 7
Figure 4: Wiring the Oxygen Transmitter to a Controller
12. If shielded cable is used, connect the cable’s drain wire to an available chassis (earth)
ground at the controller. RKI controllers typically have a ground stud that can be used
to ground the cable’s drain wire.
S
TO XIC OXY
ZERO
SIG/PWR SPAN
S
+
Controller Detector/Transmitter
Terminals, Typical D esignations
Controller Housing
J-Box
Cable Shield
Green
White
Oxygen D etector