Manual

20 • 35-3001A-11 Hydrogen Sample-Draw Detector
Parts List
Table 2 lists replacement parts and accessories for the sample-draw hydrogen detector.
Table 4: Parts List
Part Number Description
06-1248RK Sample tubing, 3/16 in. x 5/16 in., specify length
06-1248RK-03 Sample tubing, 3/16 in. x 5/16 in., 3 feet (for calibration kit)
30-1016RK Pump
33-0165RK Hydrophobic filter
33-0167RK Particle filter
57-1053RK-01 Amplifier (specify target gas when ordering)
71-0334 Operator’s Manual, 35-3001A-11 Sample-Draw Detector
81-0022RK-01 Calibration cylinder, 4% volume hydrogen in nitrogen, 34 liter
81-0076RK-01 Zero air calibration cylinder, 34 liter
81-0076RK-03 Zero air calibration cylinder, 103 liter
81-1054RK Regulator, demand flow, for 58- and 103-liter cylinders
81-1055RK Regulator, demand flow, for 17- and 34-liter steel cylinders
TE-7560 Hydrogen sensor, plug-in type, volume range