Owner's manual

18 • Sample Draw Combustible Gas Detector
Parts List
Table 4 lists replacement parts and accessories for the sample draw combustible gas
detector.
Table 2: Parts List
Part Number Description
06-1248RK Sample tubing, 3/16 x 5/16, specify length, (for calibration kit)
17-2593RK Brass insert (for INLET and EXHAUST fittings)
17-2683RK Front ferrule (for INLET and EXHAUST fittings)
17-2688RK Back ferrule (for INLET and EXHAUST fittings)
30-0610RK Pump
33-0163RK Filter (Boston DFU9933-05-DQ)
57-1050RK Transmitter (specify target gas when ordering)
61-0145RK Combustible gas sensor, NC-6240, plug-in type, LEL range
81-0002RK-01 Calibration cylinder (50% LEL Hydrogen; 34 liter)
81-0002RK-03 Calibration cylinder (50% LEL Hydrogen; 103 liter)
81-0007RK-01 Calibration cylinder (50% LEL Hexane; 34 liter)
81-0012RK-01 Calibration cylinder (50% LEL Methane; 34 liter)
81-0012RK-03 Calibration cylinder (50% LEL Methane; 103 liter)
81-0076RK-01 Zero air calibration cylinder (34 liter)
81-1001RK Dispensing valve (with knob), for 34 liter cylinders
81-1054RK Regulator (demand flow), for 103 liter cylinders
81-1126RK Gas collection bag (2 liter)