Specifications

Temperature Controller Driver
GP-Pro EX Device/PLC Connection Manual
167
A) When using the COM port conversion adapter (CA3-ADPCOM-01), the terminal block conversion adapter
(CA3-ADPTRM-01) by Pro-face, a user-created cable, and the connection cable from RKC Instrument
Inc.(W-BF-02).
• 1:1 Connection
• 1:n Connection
*4 Only the COM port which can communicate by RS-422/485 (2wire) can be used.
) IPC COM Port (page 9)
*5 To use multiple External Devices, utilize the W-BF-02 connection cable from RKC Instrument Inc.
• We recommend the TM4P-66P from HIROSE ELECTRIC CO., LTD. as the modular
connector.
• To use the External Device's COM.PORT, pair COM.PORT1 with COM.PORT2, and
COM.PORT3 with COM.PORT4.
RDB
SDB
SG
FG
CA3-ADPCOM-01
CA3-ADPTRM-01
RDA
SDA
2
1
T/R(B)
T/R(A)
3SG
TRM
COM.PORT1
or COM.PORT3
modular connector
Display
Shield
Terminal block
External Device side
Signal name
Pin
Signal name
External
Device
User-created cable
Connect the terminating
resistor connector
W-BW-01 for Z-COM
to COM.PORT2
or COM.PORT4.
Display side
RDB
SDB
SG
FG
CA3-ADPCOM-01
CA3-ADPTRM-01
RDA
SDA
2
1
T/R(B)
T/R(A)
3SG
TRM
W-BF-02
COM.PORT2
or
COM.PORT4
COM.PORT1
or
COM.PORT3
COM.PORT1
or COM.PORT3
modular connector
Display
Shield
Terminal block
External Device side
Signal name
Pin
Signal name
External
Device
User-created cable
External
Device
Connect the terminating
resistor connector
W-BW-01 for Z-COM
to COM.PORT2
or COM.PORT4.
Display side