Specifications

2. CONNECTION TO HITACHI IES PLC
2.5 PLC Side Setting
2 - 11
2
CONNECTION TO HITACHI IES PLC
2.5 PLC Side Setting
POINTPOINTPOINT
HITACHI IES PLC
For details of the HITACHI IES PLC, refer to the
following manual.
HITACHI IES PLC user's Manual
 Directly connecting to the CPU
*1 Indicates only the transmission speeds that can be set on
the GOT side.
*2 The transmission speed setting must be consistent with that
of the GOT side.
For the transmission speed setting on the GOT side, refer to
the following.
2.4.2 Communication detail settings
*3 The setting range varies with the connected PLC.
 Connecting to the intelligent serial port
module
(1) For transmission control procedure1
(2) For transmission control procedure2
Item Set value
Transmission speed
*1*2*3
4800bps, 9600bps,
19200bps, 38400bps
Station No. 0
Data bit 7bit
Stop bit 1bit
Parity bit Even
Control Method DTR control
Communication format RS-232
Sum check Done
Protocol transmission control procedure 1
Item Set value
Transmission speed 19200bps
Station No. 0
Data bit 7bit
Stop bit 1bit
Parity bit Even
Control Method None
Communication format
For RS-232 communication:
RS-232 MODE switch 2
For RS-422 communication:
RS-422 MODE switch 2
Sum check Done
Item Set value
Transmission speed 19200bps
Station No. 0
Data bit 7bit
Stop bit 1bit
Parity bit Even
Control Method None
Communication format
For RS-232 communication:
RS-232 MODE switch 9
For RS-422 communication:
RS-422 MODE switch 9
Sum check Done