Specifications

1 - 30

1. PREPARATORY PROCEDURES FOR MONITORING

1.6 Checking for Normal Monitoring

1.6.2 Confirming the communication state on the GOT side (For Ethernet

connection)

 Confirming the communication state on Windows

, GT Designer3

(1) When using the Command Prompt of Windows

Execute a Ping command at the Command Prompt of Windows

(a) When normal communication

C:\>Ping 192.168.3.18

Reply from 192.168.3.18: bytes=32 time<1ms TTL=64

(b) When abnormal communication

C:\>Ping 192.168.3.18

Request timed out.

(2) When using the [PING Test] of GT Designer3

Select [Communication] [Communication configuration] [Ethernet] and [Connection Test] to display

[PING Test].

(3) When abnormal communication

At abnormal communication, check the followings and execute the Ping command again.

• Mounting condition of Ethernet communication unit

• Cable connecting condition

• Confirmation of [Communication Settings]

• IP address of GOT specified by Ping command

1. Specify the [GOT IP Address] of the [PING

Test] and click the [PING Test] button.

2. The [Test Result] is displayed after the [PING

Test] is finished.

Click!