Specifications

13. CONNECTION TO MITSUBISHI INDIA PLC
13.6 DEVICE RANGE THAT CAN BE SET
13 - 13
CONNECTION TO MITSUBISHI INDIA PLC
13
13.6 DEVICE RANGE THAT CAN BE SET
The device ranges of controller that can be used for GOT
are as follows.
Note that the device ranges in the following tables are the
maximum values that can be set in GT Designer3.
The device specifications of controllers may differ
depending on the models, even though belonging to the
same series.
Please make the setting according to the specifications of
the controller actually used.
When a non-existent device or a device number outside
the range is set, other objects with correct device settings
may not be monitored.
 Setting item
 Device Range
*1 Some System Word devices are read-only.
For details, refer to the following.
MITSUBISHI INDIA PLC user's Manual
Item Description
Device
Set the device name, device number, and bit number.
The bit number can be set only by specifying the bit of
word device.
Information
Displays the device type and setting range which are
selected in [Device].
Network
Set the monitor target of the set device.
Station
No.
Select this item when monitoring the PLC of
the Station No. (1 to 247) specified.
Device name
Setting range
available
Device No.
representation
Bit device
Input (IX) IX0.0 to IX255.7
Decimal + OctalOutput (QX) QX0.0 to QX255.7
Marker BOOL (MX) MX0.0 to MX8191.7
Word device
Input (IW) W0 to IW254
Hexadecimal
Output (QW) QW0 to QW254
Marker (MW) MW0 to MW32254
System Word (SW)
*1
SW0 to SW468