Specifications

11. CONNECTION TO GE PLC
11.5 PLC Side Setting
11 - 13
CONNECTION TO GE PLC
11
11.5 PLC Side Setting
POINTPOINTPOINT
GE PLC
For details of GE PLCs, refer to the following manuals.
GE PLC user's Manual
11.5.1 Connecting to Series 90-30
 Communication settings
Make the communication settings using the
engineering tool.
When making the settings, set [Configuration Mode] on
the [Setting] tab of the engineering tool to "SNP only".
*1 Set to SNP.
*2 Set to Slave.
*3 Set to Long.
*4 Set to 0.
*5 Set within the range of 00 to 31.
When specifying the station No. from 0 to 9, add "0" before
the number and set it as 00 to 09.
*6 Set to 0.(only when connecting to Port2)
11.5.2 Connecting to VersaMaxMicro
 Communication settings
Make the communication settings using the
engineering tool.
*1 Set to the SNP protocol.
*2 Set to Slave.
*3 Set to Long.
*4 Set to 0.
*5 Set within the range of 00 to 31.
When specifying the station No. from 0 to 9, add "0" before
the number and set it as 00 to 09.
*6 Set the same set value for the data length for the GOT and
PLC.
Model name Refer to
PLC CPU
Series 90-30 11.5.1
VersaMaxMicro 11.5.2
Communication
Modules
IC693CMM311 11.5.3
IC697CMM711 11.5.4
Setting item PLC side setting
Port Mode
*1
SNP
Port Type
*2
Slave
Data Rate 9600bps, 19200bps
Flow Control NONE
Parity EVEN, ODD, NONE
Stop Bits 1bit, 2bits
Timeout
*3
Long
Turn Around Delay
*4
0
SNP ID
*5
00 to 31
Converter Power Consumption
*6
0
Setting item PLC side setting
Data Rate
9600bps, 19200bps,
38400bps
Bits / Character
*6
7bits, 8bits
Parity EVEN, ODD, NONE
Stop Bits 1bit, 2bits
Port Mode
*1
SNP
Port Type
*2
Slave
Flow Control NONE
Timeout
*3
Long
Turn Around Delay
*4
0
SNP ID
*5
00 to 31