Specifications

9. CONNECTION TO RKC TEMPERATURE CONTROLLER
9.5 Temperature Controller Side Setting
9 - 41
CONNECTION TO RKC TEMPERATURE CONTROLLER
9
9.5 Temperature Controller Side Setting
POINTPOINTPOINT
YOKOGAWA temperature controller
For details of RKC temperature controller, refer to the
following manual.
User's Manual of the RKC temperature
controller
9.5.1 Connecting to H-PCP-J
 Communication settings
Make the communication settings of the temperature
controller.
*1 Adjust the settings with GOT settings.
*2 Select the unit address without overlapping with that of other
units.
 Setting DIP switches
Make the settings of transmission speed,
communication mode, data length, parity bit and stop
bit.
(1) Transmission speed settings
(a) COM.PORT1/COM.PORT2
(b) COM.PORT3
Model name Refer to
Temperature controller
H-PCP-J 9.5.1
H-PCP-A, H-PCP-B 9.5.2
Z-TIO module,
Z-DIO module,
Z-CT module
9.5.3
Z-COM module 9.5.4
CB Series 9.5.5
FB Series 9.5.6
RB Series 9.5.7
PF900/901 9.5.8
HA400/401, HA900/901 9.5.9
AG500 9.5.10
RMC500 9.5.11
MA900, MA901 9.5.12
THV-A1 9.5.13
SA100
SA200
9.5.14
X-TIO module 9.5.15
Item Setting range
Transmission speed
*1
9600bps, 19200bps, 38400bps
Communication mode MODBUS
Data bit 8bits
Parity bit None
Stop bit
*1
1bit
Unit address
*2
0 to F
SW2
Communication speed
3 4
OFF OFF 9600bps
ON OFF 19200bps
OFF ON 38400bps
SW3
Communication speed
3 4
OFF OFF 9600bps
ON OFF 19200bps
OFF ON 38400bps
COM.PORT1/COM.PORT2
setting switch(SW2)
COM.PORT3
setting switch
(SW3)
COM.PORT3
COM.PORT1
COM.PORT2
1
ON
2345678 1
ON
2345678
Front
Right side