Specifications

6 - 20
6. CONNECTION TO YASKAWA PLC
6.3 Ethernet Connection
6.3 Ethernet Connection
6.3.1 System configuration for connecting to MP-920 or MP2200 or MP2300 or
MP2300S or CP-9200SH or CP-312 or CP-317
*1 The destination connected with the twisted pair cable varies with the configuration of the applicable Ethernet network system.
Connect to the Ethernet module, hub, transceiver or other system equipment corresponding to the applicable Ethernet network
system.
Use cables, connectors, and hubs that meet the IEEE802.3 10BASE-T/100BASE-TX standards.
*2 A length between a hub and a node.
The maximum distance differs depending on the Ethernet device to be used.
The following shows the number of the connectable nodes when a repeater hub is used.
10BASE-T: Max. 4 nodes for a cascade connection (500m)
100BASE-TX: Max. 2 nodes for a cascade connection (205m)
When switching hubs are used, the cascade connection between the switching hubs has no logical limit for the number of
cascades.
For the limit, contact the switching hub manufacturer.
*3 Product manufactured by YASKAWA Electric Corporation. For details of the product, contact YASKAWA Electric Corporation.
Communications
Module
MP920,MP2200,
MP2300,MP2300S,
CP-9200SH,CP-312,
CP-317
GOT
Connection cable
Ethernet(
YASKAWA
), Gateway
Communication driver
PLC Connection cable GOT
Number of connectable
equipment
Model
name
Communication
module
*3
Cable model
*1
Maximum
segment
length
*2
Option device Model
MP-920 218IF
100BASE-TX
Shielded twisted pair cable (STP) or
unshielded twisted pair cable (UTP)
of category 5 or higher
10BASE-T
Shielded twisted pair cable (STP) or
unshielded twisted pair cable (UTP)
of category 3 or higher
100m - (Built into GOT)
When PLC (module):GOT is N:1
The following shows the number
of PLCs for 1 GOT
TCP: 128 or less
UDP: 128 or less
When PLC (module):GOT is 1:N
The following shows the number
of GOTs for 1 PLC (module)
TCP/UDP: 10 or less
MP2200
MP2300
MP2300S
218IF-01
218IF-02
MP2300S
CP-9200SH
CP-312
CP-218IF
CP-317 218TXB