Specifications

6. CONNECTION TO YASKAWA PLC
6.2 Serial Connection
6 - 17
6
CONNECTION TO YASKAWA PLC
6.2.9 PLC Side Settings
POINTPOINTPOINT
YASKAWA PLC
For details of YASKAWA PLCs, refer to the following
manuals.
YASKAWA PLC user's Manual
 Communication and port settings
Make the communication and port settings with a
peripheral tool.
*1 Set the address according to the Host Address setting on the
GOT side.
For the Host Address setting on the GOT side, refer to the
following.
6.2.8 ■ Communication detail settings
*2 Only transmission speeds available on the GOT side are
shown.
Also, the setting range differs depending on the YASKAWA
PLC model.
*3 The transmission speed setting must be consistent with that
of the GOT side.
For the transmission speed setting on the GOT side, refer to
the following.
6.2.8 ■ Communication detail settings
Device name Set value
Address
*1
1 to 31
Protocol MEMOBUS
Mode RTU
Transmission
speed
*2*3
4800bps, 9600bps, 19200bps, 38400bps,
57600bps
Data bit 8bits
Stop bit 1bit
Parity bit Even
Error check CRC16