Specifications

5 - 16
5. CONNECTION TO FUJI TEMPERATURE CONTROLLER
5.5 Temperature Controller Side Setting
(2) Settings of DCE/DTE, RS-422/485 and terminating
resistor selection
5.5.5 Connecting to interface
converter (SI-30A)
 Communication settings
Make the communication settings using setting
switches.
*1 Set as necessary.
 Settings by switch
(1) Settings of transmission speed, MANUAL-AUTO
and terminating resistor selection
*1 Set as necessary.
(2) Setting of DCE/DTE switching
Setting item Set value
DCE/DTE DCE
RS-422/485 RS-485
Terminating resistor
selection
OFF
DCE-DTE
422-485
TERMINATOR
ON-OFF
Item Set value
Transmission speed 9600bps
MANUAL-AUTO AUTO
DCE/DTE switching DCE
Terminating resistor
selection
*1
ON/OFF
Setting item Set value
Switch No. of DIP SWB
1 2 3 4 5
Transmission
speed
9600bps ON ON OFF
MANUAL-AUTO AUTO ON
Terminating
resistor
selection
*1
Enable ON
Disable OFF
Setting item Set value
DCE/DTE DCE
SW A
DCEDTE
RS-232C
AC 100V
FG
RS-232C/RS-485
CONVERTER
SD/RD
DRIVER
ACTIVE
RS-485
SG
A
B
DCE/DTE switch
DIP SW B:
Communication
setting switch