Specifications

5 - 10
5. CONNECTION TO FUJI TEMPERATURE CONTROLLER
5.3 Connection Diagram
(5) RS-485 connection diagram 5)
*1 Pin No. of temperature controller differs depending on the model. Refer to the following table.
*2 Terminating resistor should be provided for a temperature controller which will be a terminal.
*3 Set the terminating resistor of GOT side which will be a terminal.
■ Connecting terminating resistors
*4 Connect FG grounding to the appropriate part of a cable shield line.
(6) RS-485 connection diagram 6)
*1 Pin No. of temperature controller differs depending on the model. Refer to the following table.
*2 Terminating resistor should be provided for a temperature controller and an interface converter which will be terminals.
*3 Connect FG grounding to the appropriate part of a cable shield line.
Signal name
Model of temperature controller
PXR3 PXR4 PXR5/9 PXG4 PXG5/9 PXH9
Pin No. Pin No. Pin No. Pin No. Pin No. Pin No.
[phone]
-14828216
GOT side
*
3
SDA1
SDB1
RDA1
RDB1
SDA2
SDB2
RDA2
RDB2
SG
FG
1
2
3
4
5
6
7
8
9
10
+
*
1
-
*
1
+
*
1
-
*
1
*
4
*
4
Temperature
controller side
Temperature
controller side
Terminating resistor(100Ω 1/2W)
*
2
Signal name
Model of temperature controller
PXR3 PXR4 PXR5/9 PXG4 PXG5/9 PXH9
Pin No. Pin No. Pin No. Pin No. Pin No. Pin No.
[phone]
-14828216
Interface
converter
(K3SC-10)
*
2
+
*
1
-
*
1
+
*
1
-
*
1
+
-
11
8
*
3
*
3
Temperature
controller side
Temperature
controller side
Terminating resistor(100Ω 1/2W)
*
2