Specifications

4 - 26
4. CONNECTION TO FUJI PLC
4.3 Ethernet Connection
 IP Filter Setting
To improve security, the GOT 2000 series supports the
IP Filter Setting.
For details on the IP Filter Setting, refer to the following
manual.
GT Designer3 (GOT2000) Help
4.3.3 PLC side setting
(MICREX-SX SPH)
POINTPOINTPOINT
FUJI PLC
For details of FUJI PLCs, refer to the following
manuals.
FUJI PLC user's Manual
 Setting the IP address and self port reference
No.
Set the IP address and self port reference No. using a
peripheral tool of the PLC.
*1 Adjust the settings with GOT settings.
4.3.2 ■ Ethernet setting
*2 Make sure that "Self port reference No. + 251" is equivalent
to the port No. in the GOT.
4.3.2 ■ Ethernet setting
Item Set value Range
IP Address
*1
[ ].[ ].[ ].[ ] PLC side IP address
Subnet Mask [ ].[ ].[ ].[ ]
PLC side setting
Default Gateway IP
Address
[ ].[ ].[ ].[ ]
Self port reference
No.
*2
0 to 65280