Specifications

4 - 22
4. CONNECTION TO FUJI PLC
4.2 Serial connection
4.2.8 Station number setting
Set each station number so that no station number
overlaps.
The station number can be set without regard to the cable
connection order. There is no problem even if station
numbers are not consecutive.
(1) Direct specification
Specify the station No. of the PLC to be changed when
setting device.
Specification range
0 to 99
GOT
Station
No.3
Station
No.0
Station
No.1
Station
No.15
Station
No.6
Examples of station number setting