Specifications

4. CONNECTION TO FUJI PLC
4.2 Serial connection
4 - 17
4
CONNECTION TO FUJI PLC
4.2.7 PLC Side Setting
POINTPOINTPOINT
FUJI PLC
For details of FUJI PLCs, refer to the following
manuals.
FUJI PLC user's Manual
 Connecting to NV1L-RS2, NC1L-RS2
(1) Communication settings
Make the communication settings using setting
switches.
*1 Adjust the settings with GOT settings.
(2) Settings by switch
Make the communication settings using each setting
switch.
(a) Setting of the MODE
Make the MODE settings using the MODE switch.
Model name Refer to
RS-232C
interface card
NV1L-RS2
n
General-purpose interface
module
NC1L-RS2
NC1L-RS4 n
FFU120B n
RS-232C/485
interface capsule
FFK120A-C10 n
Item Set value
MODE
Command-setting-type start-stop
synchronization, nonsequence format
Transmission speed
*1
9600bps, 19200bps
Data bit
*1
8bits or 7bits
Parity bit*1
Even or Odd
Done, None
Stop bit
*1
1bit, 2bits
Initializing method By switch
MODE
Switch position
NV1L-RS2 NC1L-RS2
Command-setting-type
start-stop
synchronization,
nonsequence format
11
(For the NV1L-RS2)
(Rear view)
(For the NC1L-RS2)
(Front view)
Character configuration
switches
Operation mode
setting switch
(Rear view)(Front view)