Instruction manual

2. SPECIFICATIONS
IMSRM52-E5
14
Continued from the previous page.
Item Specifications
Communication items Remote relay
− First alarm status
− Second alarm status
− Burnout alarm status
− Heater break alarm (HBA) status
− PID/AT transfer status
− Control RUN/STOP transfer
Remote registers (Read only)
− Temperature measured value (PV)
− Manipulated output (Heat-side)
− Manipulated output (Cool-side)
− CT input measured value
− Control RUN/STOP status
− Decimal-point position
− Set value monitoring
− Control loop break alarm (LBA) status
− Error code
Remote registers (Common to read and write)
− Temperature set value (SV)
− PID/AT transfer
− Proportional band (Heat-side)
− Proportional band (Cool-side)
− Integral Time
− Derivative Time
− Control response designation parameters
− PV bias
Communication items Remote registers (Common to read and write)
− First alarm set value
− Second alarm set value
− Proportioning cycle time (Heat-side)
− Proportioning cycle time (Cool-side)
− Overlap/Deadband
− Heater break alarm (HBA) set value
− Operation mode setting
− Memory area number
− Auto/Manual transfer
− Manual output value
− Loop break alarm (LBA) use selection
− LBA time setting
− LBA Deadband
No. of remote registe
r
channels
0: 16 channels
1: 8 channels
Factory set value: 0
Can be changed by the host computer communication setting.
Current consumption 290 mA DC
Dimensions 24 (W)
×
96 (H)
×
100 (D) m
m
Weight 200 g