Instruction manual

1. OUTLINE
IMSRM52-E5
5
1.5 System Configuration
If the SR Mini HG SYSTEM control unit is connected to Control & Communication Link via the
H-LNK-A module (Link module), data on the SR Mini HG SYSTEM can be processed by the
programmable controller (Mitsubishi MELSEC: hereinafter, PLC). In addition, the SR Mini HG
SYSTEM control unit is connected to Control & Communication Link as a remote device station.
When only the SR Mini HG SYSTEM control units are connected to Control &
Communication Link: Up to 16 units.
Up to 64 stations (Up to 16 units)
When the host computer is connected:
Up to 16 units (Only when RS-422A is used)
Control &
Communication
Link
Host
computer
RS-232C/RS-422A
(RKC standard
protocol)
RS-422A
(RKC standard
protocol)
RS-422A
(RKC standard
protocol)
RS-232C/
RS-422A
(dedicated
protocol)
The SR Mini HG
SYSTEM can be set
and monitored.
Both PLC and SR Mini HG
SYSTEM can be set and
monitored.
Operation panel, OPC-H
H-LNK-
A
Master station
Mitsubishi PLC
Function modules,
Up to 8 modules
SR Mini HG SYSTEM control unit
H-LNK-A
H-PCP-G
SR Mini HG SYSTEM control unit
Function modules,
Up to 8 modules
H-PCP-G