Instruction manual

IMS01J02-E1 43
5. SETTINGS BEFORE OPERATION
5.1 Protocol Selection and Host Communication Setting
Protocol, data bit configuration, communication speed and initialize method can be set with the dip
switches located in the H-PCP-J module.
COM.PORT1/COM.PORT2
setting switch (SW2)
COM.PORT3 setting switch
(SW3)
18765432
ON
18765432 ON
Right side view
 To prevent electric shock or instrument failure, always turn off the power
before setting the switch.
 To prevent electric shock or instrument failure, never touch any section other
than those instructed in this manual.
WARNING
!