Instruction manual

1. OUTLINE

IIMS01J02-E1

Continued from the previous page.

No. Name Description

(3)

Modular connector (COM.PORT3) Connector for connection with the host computer,

touch panel or operation panel

(Conforming to RS-232C/RS-422A/RS-485)

(4)

DO connector Connector for digital output

(5)

Power terminals Power supply and ground terminals

(6)

Modular connector (COM.PORT2) Connector for the control unit addition

(Conforming to RS-422A/RS-485)

(7)

Modular connector (COM.PORT1) Connector for connection with the host computer,

touch panel, operation panel or PLC

(Conforming to RS-422A/RS-485)

(8)

COM.PORT3 setting switch (SW3) Set communication protocol, data bit configuration,

communication speed and initialize method of

modular connector (COM.PORT3).

(9)

COM.PORT1/COM.PORT2 setting

switch (SW2)

Set communication protocol, data bit configuration

and communication speed of modular connector

(COM.PORT1/COM.PORT2).

(10)

Mother block Module DIN rail mounting connector

(11)

Module connector Connector for power supply and bus connection