Instruction manual

8. FUNCTIONS
IMS01J02-E1
170
 Assignment of the master channels
It is possible to assign the master channel corresponding to the slave channel if in the same unit.
The master channel is assigned by “H-DO-G master channel setting.”
H-DO-G master channel setting
Setting range: 0 to The number of H-TIO- module use channel (0: Unused)
Example: Setting in the following system configuration.
H-PCP-J module ........................... 1
H-TIO-B module (2 channels) ....... 4 (Master channel 1 to 8)
H-DO-G module (16 channels) ...... 2 (Slave channel 1 to 32 )
SR Mini HG SYSTEM control unit
H-TIO-B
module
×
4
H-PCP-J
module
H-DO-G
module
×
2
DO1 to 2
Slave channel manipulated output
value of master channel 1
DO3 to 7
Slave channel manipulated output
value of master channel 2
DO8 to 12
Slave channel manipulated output
value of master channel 3
DO13 to 16
Slave channel manipulated output
value of master channel 4
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
DO17 to 19
Slave channel manipulated output
value of master channel 5
DO20 to 22
Slave channel manipulated output
value of master channel 6
DO23 to 25
Slave channel manipulated output
value of master channel 7
DO26 to 28
Slave channel manipulated output
value of master channel 8
DO29 to 32
Unused
Master channel
Continued on the next page.