Instruction manual

6. RKC COMMUNICATION
108 IMS01J02-E1
RTD input (H-TIO-A/B/C/D/E/F/G/K/P/R, H-TI-A/B, H-CIO-A)
Input type Range No.
0.0 to 400.0 ° C 59
0 to 400 ° C 38
− 200 to + 200 ° C 39
− 200.0 to + 200.0 ° C 58
JPt100 − 50.00 to + 150.00 ° C
1
106
− 300 to + 900 ° F 41
0 to 800 ° F 40
0.0 to 800.0 ° F 60
− 300.0 to + 900.0 ° F
2
104
0.0 to 400.0 ° C 62
0 to 400 ° C 42
− 200 to + 200 ° C 43
− 200.0 to + 200.0 ° C 61
Pt100 − 50.00 to + 150.00 ° C
1
107
− 300 to + 1200 ° F 45
0 to 800 ° F 44
0.0 to 800.0 ° F 63
− 300.0 to + 1200.0 ° F
2
105
Current input and Voltage input (H-TIO-H/J, H-CIO-A)
Input type Range No. Input group
0 to 10 mV DC 0.0 to 100.0 % 0
− 10 to + 10 mV DC 0.0 to 100.0 % 1
0 to 100 mV DC 0.0 to 100.0 % 2
− 100 to + 100 mV DC 0.0 to 100.0 % 3 Voltage (low) input group
Voltage 0 to 1 V DC 0.0 to 100.0 % 4
input * − 1 to + 1 V DC 0.0 to 100.0 % 5
0 to 5 V DC 0.0 to 100.0 % 6
1 to 5 V DC 0.0 to 100.0 % 7
− 5 to + 5 V DC 0.0 to 100.0 % 8
0 to 10 V DC 0.0 to 100.0 % 9 Voltage (high) input group
− 10 to + 10 V DC 0.0 to 100.0 % 10
Current 0 to 20 mA DC 0.0 to 100.0 % 11 Current input group
input * 4 to 20 mA DC 0.0 to 100.0 % 12
* Display scale of the current and voltage input can be changed.
An input type change may only be made within the input groups as shown above.
Pulse input (H-SIO-A)
Input type Range No.
Pulse
input
• Dry contact input (Power supply for sensor,
12 V DC)
• Voltage input (Power supply for sensor, 12 V DC)
Specify when ordering with model code.
0
Do not set any number other than 0, as this may cause malfunction.
1
The range with the resolution of 1/100 can be
specified only by H-TIO-E module.
2
The range can be specified only by H-TIO-F
module (high accuracy type).