Specifications

IMR01H03-E4
1
1. PROCEDURE FOR INITIALIZATION
Initialization is to set parameters relating to instrument specifications (input type, input range, alarm
type, etc.). Engineering mode that can do this setting.
!"
Initialization flowchart
See
1.1 Transfer to Engineering Mode.
See
1.1 Transfer to Engineering Mode.
See
1.2 Procedure for Parameter Setting
.
See
2. DETAILS OF PARAMETER SETTING
.
See
1.3 End of Engineering Mode
.
Power ON
End of initialization
Change from RUN to STOP
Unlock the engineering mode
Setting the initial parameter
Lock the engineering mode