Specifications

3. INITIALIZE COMMUNICATION DATA
IMR01H03-E4
46
Continued from the previous page.
Name Data range Factory set value Attri-
bute
Control output logic
selection 2
•
••
• MA900 (OUT5 to OUT8)
OUT5
0: No output
1: Cool-side control output of CH1
1
2: No output
3: No output
4: Alarm 3 of CH1
2
5: Alarm 3 of CH2
2
6: Alarm 3 of CH3
2
7: Alarm 3 of CH4
2
8 to 11: No output
OUT6
0: No output
1: Cool-side control output of CH2
1
2 to 11: Same as OUT5
OUT7
0: No output
1: Cool-side control output of CH3
1
2 to 11: Same as OUT5
OUT8
0: No output
1: Cool-side control output of CH4
1
2 to 11: Same as OUT5
•
••
• MA901 (OUT5 to OUT8)
OUT5
0: Heat-side control output of CH5
3
OUT6
0: Heat-side control output of CH6
3
OUT7
0: Heat-side control output of CH7
3
OUT8
0: Heat-side control output of CH8
3
Factory set value
varies depending on
the instrument
specification.
R/W
1
Setting becomes effective at the time of heat/cool control.
2
Not output when alarm 3 corresponds to the FAIL alarm.
3
This data is 0 fixation. This data must not set the set value besides 0.
Continued on the next page.