Specifications

2. DETAILS OF PARAMETER SETTING

IMR01H03-E4

2.10 F61 Communication Function

(1) Communication protocol selection (CMPS)

If the protocol is selected, always turn the power on again or select RUN from STOP.

When the MA901 instrument specification corresponds to heater break alarm, the

communication function can't be added. Therefore, do not use this parameter.

Details of setting Factory set value

0000 RKC communication protocol (Multi-point mode)

0001 Modbus communication protocol Note 1

0002 RKC communication protocol (Single mode)

Note 1 Factory set value varies depending on the instrument specification.

(2) RUN/STOP transfer logic selection

Select the logic of RUN/STOP transfer in the communication mode.

Details of setting Factory set value

0000 Set in 0: STOP mode

Set in 1: RUN mode

0000

0001 Set in 0: RUN mode

Set in 1: STOP mode