Specifications

1. PROCEDURE FOR INITIALIZATION
IMR01H03-E4
7
4. Press the SET key to register the value thus set. The display changes to the next parameter.
Display unit selection Input type selection
CH R/S
SET
MA900
PV
CH
SV AREA
CH R/S
SET
MA900
PV
CH
SV AREA
Example 2:
The following procedure is for changing all channels of the input type from “K” to “J.” (Batch
setting)
1. Press the UP key to change the display to F21.
Function block display
CH R/S
SET
MA900
PV
CH
SV AREA
2. Press the SET key to change to input type selection (InP).
Input type selection
CH R/S
SET
MA900
PV
CH
SV AREA