Specifications

1. PROCEDURE FOR INITIALIZATION
IMR01H03-E4
6
!"
!"!"
!"Example of changing the setting
As setting procedure example, show procedure at setting with each channel (Usual setting) and
channel common (Batch setting).
MA900 is used in the below figures for explanation, but the same setting procedures also
apply to MA901.
Example 1:
The following procedure is for changing the CH1 input type from “K” to “J.” (Usual setting)
1. Press the UP key to change the display to F21.
Function block display
CH R/S
SET
MA900
PV
CH
SV AREA
2. Press the SET key to change to input type selection (InP).
Input type selection
CH R/S
SET
MA900
PV
CH
SV AREA
3. Press the UP key to enter 1 in the least significant digit of the set value (SV) display.
Input type selection
CH R/S
SET
MA900
PV
CH
SV AREA