Manualshelf

Instruction manual

ManualsBrandsRKC INSTRUMENT ManualsMusical equipmentMA900
11121314151617181920
4. SETTING
IMR01H02-E3
12
4. Press the UP key to enter 1 at the tens digit.
CH
R/S
SET
MA900
PV
CH
SV
AREA
5. Press the SET key to set the value thus set. The display changes to the next communication
parameter. It the SET key is not pressed within 1 minute, the present display returns to the
PV/SV monitor mode and the value set here returns to that before the setting is changed.
Communication speed setting
CH
R/S
SET
MA900
PV
CH
SV
AREA
6. After completing all communication parameter settings, turn on the power again, and register the
set value which changed. After the power is turned on again, communication is made using the
set value changed.
Besides power on again, register of set value with RUN/ STOP transfer. In this case, have to
change to STOP before setting communication parameter. Change to RUN after completing
the communication parameter settings, the instrument performs the same operation as that at
the time of power on again.
In addition, it the communication parameter is changed at RUN, communication is made
using the set value changed if returned to RUN once set to STOP.
For the RUN/STOP transfer, see the Instruction Manual (IMR01H01-E
$
$$
$
).