Instruction manual

4. SETTING
IMR01H02-E3
11
!"
!"!"
!"
Setting procedure example
MA900 is used in the below figures for explanation, but the same setting procedures also
apply to MA901.
1.
Go to the setup setting mode so that device address (slave address), Add, is displayed.
Present set value is displayed, and the least significant digit light brightly.
Device address setting
(Slave address)
CH R/S
SET
MA900
PV CH
SV AREA
2. Set the device address. Press the UP key to enter 5 at the least significant digit.
Example: Setting the device address (slave address) to 15.
CH R/S
SET
MA900
PV CH
SV AREA
3. Press the <R/S key to brightly light the tens digit.
CH R/S
SET
MA900
PV CH
SV AREA