Instruction manual

4. MOUNTING

IMSRM15-E6

Module mounting depth (For DIN rail mounting)

The mounting depth of each module is 108 mm from the mounting surface inside the panel to the front

of the module with the module mounted on the DIN rail. However, when modular connector cables are

plugged in, additional depth is required.

4.4 Mounting the Mother Block

The mother block can be mounted to a panel or DIN rail.

Mount the H-PCP module on the left side of the control unit.

Panel mounting directions

1. Refer to both the panel mounting dimensions below and the 4.3 Dimensions (P. 90) when

selecting the location.

4-M3

Double type module Dimensions for multiple

module mounting.

(Unit: mm)

Single type module

2-M3

2. Remove the module from the mother block. For details of removing the module, refer to

4.7 Removing the Module Mainframe (P. 94).

(Unit: mm)

Approx.

108