Instruction manual

3. DESCRIPTION OF EACH MODULES

IMSRM15-E6

3.11.3 Functional description

Analog output function

The H-AO module can output control unit related data to a recorder, etc. as analog signal.

Data item to be output Corresponding channel range

Temperature measured value (PV) 1 to 20 CH (H-TIO/H-CIO module)

Temperature set value (SV) 1 to 20 CH (H-TIO/H-CIO module)

Temperature deviation value 1 to 20 CH (H-TIO/H-CIO module)

Heat-side control output value 1 to 20 CH (H-TIO/H-CIO module)

Cool-side control output value 1 to 20 CH (H-TIO/H-CIO module)

H-AI module input value 1 to 40 CH (H-AI module)

H-TI module input value 1 to 40 CH (H-TI module)

H-TIO-K module feedback resistance input value 1 to 10 CH (H-TIO-K module)

Data can be output for each control unit.

When the control unit is multi-drop connected, no data on other control units can be output.

Output change rate limit function

This function is used to restrict rapid analog output changes.

The settings of the function becomes valid in manual mode.