Instruction manual

3. DESCRIPTION OF EACH MODULES
IMSRM15-E6
44
3.4 H-TIO Module
3.4.1 Outline
The H-TIO module is used to perform temperature or process control.
The H-TIO modules corresponding to the necessary number of control points are connected to the
H-PCP module.
For details on the limited number of H-TIO modules connected to the H-PCP module, refer
to page 24.
A, E, H and R type [1 channel type]
OUT (Heat)
OUT (Alarm): Optional
CT: Optional
*
IN
* Not provided for the E, H and R type.
B, F, J and P type [2 channels type]
OUT1 (CH1)
OUT2 (CH2)
IN1 (CH1)
IN2 (CH2)
C and G type [1 channel heat/cool type]
OUT (Heat)
OUT (Cool)
CT: Optional
*
IN
* Not provided for the G
K type [1 channel position proportioning type]
OUT1 (Open-side)
OUT2 (Close-side)
IN (FBR)
IN (CH1)
D type [2 channels heat/cool type]
OUT (Heat): CH1
OUT (Cool): CH1
CT1 (Optional): CH1
IN: CH1
OUT (Heat): CH2
OUT (Cool): CH2
CT2 (Optional): CH2
IN: CH2