Instruction manual

8. SPECIFICATIONS
IMSRM15-E6
154
8.4.2 Cascade control module (H-CIO-A) [Current/voltage input]
Input
Number of inputs: 2 points (Master input/slave input)
Isolated between input and input, and between input and output.
Input type: Voltage input: 0 to 10 mV DC, 0 to 100 mV DC, 0 to 1 V DC,
0 to 5 V DC, 1 to 5 V DC, 0 to 10 V DC, -5 to +5 V DC,
-10 to +10 V DC, -1 to +1 V DC
Current input: 0 to 20 mA DC, 4 to 20 mA DC
Specify when ordering
Input range: -5 to +105 % of span
Refer to Input range table (P. 14)
Resolution: 1/10000
Sampling cycle: 0.1 seconds
Input impedance: Voltage input: 1 M
or more
Current input: 250
Analog input filter: Cut-off frequency: Approx. 11.6 Hz
Rise time: Approx. 33 ms
Response of 90 %
Digital input filter: First order lag digital filter
Time constant: Settable from 0.1 to 100.0 seconds
(Setting 0.0: Filter off)
Action at input break: Indicates value near zero
Measured accuracy:
0.1 % of span 1 digit
Input scaling range: -9999 to +10000
However, scaling is possible within a span of 10000 maximum.
Decimal point position can be varied down to 1 digit.
Noise rejection ratio: Normal mode: Refer to item Input filter
Common mode: -120 dB or more (50/60 Hz)
Control action
Control method: Brilliant PID control (PI control can also be used.)
Heat/Cool control is not available.
Control cycle: 0.1 seconds
Other functions: Overshoot prevention function (RFB limiter method)
Enhanced autotuning function