Instruction manual

8. SPECIFICATIONS
IMSRM15-E6
153
Cascade function
Monitor item: Cascade monitor: Input range
Normal setting value: Cascade bias: -99.99 to +100.0 % of span
Cascade gain: -9.999 to +10.000 (No engineering unit)
Cascade ON/OFF: 0: OFF
1: ON
Cascade control is turned ON/OFF via communication
or by digital input.
Initial setting value: Cascade data selection: 0: Output values
1: Measured values
2: Local set values
3: Set value monitoring
4: Deviation (Local set values - Measured values)
Tracking function: 0: OFF
1: ON
Digital input selection function:
0: Function OFF
1: Cascade ON/OFF
2: Master channel Auto/Manual transfer
3: Valid for both 1 and 2
Self-diagnostic
Check item: RAM check
Adjustment data check
Input value check
Watchdog timer
Operation at error occurrence in self-diagnosis:
FAIL lamp lights
All channel control outputs are turned off.
Reset state
Manual setting function
Auto/Manual transfer: Either Auto or Manual control can be selected.
Setting range: -5.0 to +105.0 %
Balanceless bumpless: Balanceless bumpless transfer between Auto and Manual (both directions).
General specifications
Dimensions: 48 (W) 96 (H) 100 (D) mm
Weight: 260 g