Instruction manual

8. SPECIFICATIONS
IMSRM15-E6
129
Digital output
Failure output: Relay contact output
Number of outputs: 1 point
Rating: 250 V AC, 0.1 A (Resistive load)
[CE/UL/cUL (or CSA) approved instrument:
30 V DC, 0.1 A]
Electrical life: 300,000 times or more (Rated load)
Contact type: 1a contact
Failure action: Open at error occurrence
Digital output:
1-2
Relay contact output
Number of outputs: 4 points (H-PCP-B type: 2 points)
Rating: 250 V AC, 0.1 A (Resistive load)
[CE/UL/ cUL (or CSA) approved instrument:
30 V DC, 0.1 A]
Electrical life: 300,000 times or more (Rated load)
Contact type: 1a contact
Open collector output
Number of outputs: 4 points (H-PCP-B type: 2 points)
Load voltage: 12 to 24 V DC
Maximum load current: 0.1 A/point, 0.8 A/common
1
Specify either relay contact output or open collector output when ordering.
2
Digital output can be selected from the following:
- Temperature alarm (alarm 1, alarm 2)
- AI alarm (alarm 1, alarm 2)
- Heater break alarm (HBA)
- Burnout alarm
- Loop break alarm (LBA)
- Temperature rise completion
Digital input (Only for H-PCP-B type)
Number of inputs: 3 points
Input type: Source type
Rated input voltage: 24 V DC
Input voltage range: 21.6 to 26.4 V DC
Rated input current: 6.7 mA/point (24 V DC)
Input impedance: 3.6 k
Input operating voltage: ON voltage: 18.5 V DC
OFF voltage: 9.0 V DC
Allocated functions: 1. Memory area transfer (8 memory areas)
2. Control RUN/STOP and memory area transfer (4 memory areas)
3. Alarm interlock release, control RUN/STOP and
memory area transfer (2 memory areas)
Selectable