Instruction manual

1. OUTLINE
IMSRM15-E6
4
H-PCP module (Power/CPU module) model code
(1) Type
A: DO 4 points type
B: DO 2 points type with DI function
(2) Power supply voltage
1: 100 to 120 V AC
2: 200 to 240 V AC
3: 24 V DC
(3) Communication interface
1: RS-232C
4: RS-422A
(4) External connector
N: No function
Alarm code table
The selected function will be common for all the modules with alarm functions in the control
unit.
For the H-PCP module with the ladder communication, special specification code “Z-190”
must be specified at the end of the model code. The H-TIO-K, H-CIO-A, H-DI-B and
H-DO-C module cannot be used to the H-PCP-A/B module with the specification of ladder
communication.
When the communication interface of H-PCP module is RS-232C, only one control unit can
be connected.
For the H-PCP-A module with the Modbus communication, special specification code
“Z-1021” must be specified at the end of the model code. The H-TIO-K, H-TI-A/B/C,
H-CIO-A, H-DI-A/B, H-DO-A/B/C/D, H-AI-A/B and H-AO-A/B module cannot be used to
the H-PCP-A module with the specification of Modbus communication.
H-PCP- - N -
(1) (2) (3) (4) (5) (6) (7)
(5) DO signal
M: Relay contact output
D: Open collector output
(6) First alarm function *
N: No alarm function
: Refer to Alarm code table
(7) Second alarm function *
N: No alarm function
: Refer to Alarm code table
*
It is alarm function of H-TIO- module,
H-CIO-A module.
A: Deviation High B: Deviation Low
C: Deviation High and Low D: Deviation Band
E: Deviation High (with alarm hold) F: Deviation Low (with alarm hold)
G: Deviation High and Low (with alarm hold) H: Process High
J: Process Low K: Process High (with alarm hold)
L: Process Low (with alarm hold)
A special alarm function
Q: Deviation High (with alarm re-hold) R: Deviation Low (with alarm re-hold)
T: Deviation High and Low (with alarm re-hold)