User`s manual

Temperature Controller MODBUS SIO Driver
GP-Pro EX Device/PLC Connection Manual
46
 Device Setting
To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific
Settings ] of [Device/PLC Settings ].

Settings of External Device
Use the unit address setting switch on the front of the Temperature Controller and the DIP switch on the side of
the Temperature Controller for communication settings of the External Device.
Please refer to the manual of the Temperature Controller for more details.
 Procedure
1. Use the unit address setting switch on the front of the Temperature Controller to set the module address for
HOST link.
The number added 1 to the set value becomes the unit address.
2. Use the DIP switch on the side of the Temperature Controller to set the speed and the data configuration.
 Setting Value
Unit address setting switch
DIP Switch
COM.PORT1/COM.PORT2 setting switch
High digit setting
0
Low digit setting
0
SW2 Settings Description
1OFF
Data bit configuration
2OFF
3OFF
Speed
4OFF
5ON
Communication
Protocol
6OFF
7OFF
8OFF