User`s manual

Temperature Controller MODBUS SIO Driver
GP-Pro EX Device/PLC Connection Manual
42
 Device Setting
To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific
Settings ] of [Device/PLC Settings ].

Settings of External Device
Use the slave address setting switch on the front of the Temperature Controller and the DIP switch inside the
Temperature Controller for communication settings of the External Device.
Please refer to the manual of the Temperature Controller for more details.
 Procedure
1. Use the slave address setting switch on the front of the Temperature Controller to set the slave address for
HOST link.
The number added 1 to the set value becomes the slave address.
2. Remove the Temperature Controller from the mother block, and use the DIP switch inside the Temperature
Controller to set the speed and the data configuration.
 Setting Value
Slave address setting switch
DIP Switch
High digit setting
0
Low digit setting
0
DIP Switch Settings Description
1ON
Data configuration
2ON
3ON
Speed
4OFF
• Parameters to be set vary depending on the Temperature Controller. Please refer to the manual of
the Temperature Controller for more details.