User`s manual

Temperature Controller MODBUS SIO Driver

GP-Pro EX Device/PLC Connection Manual

 Device Setting

To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific

Settings ] of [Device/PLC Settings ].



Settings of External Device

Use the SET key, shift key, down key and up key on the front of the Temperature Controller for communication

settings of the External Device.

Please refer to the manual of the Temperature Controller for more details.

 Procedure

1. While pressing down the SET key, press the shift key to move from the PV/SV display mode to the

communication setting mode.

2. Press the SET key to select the parameter.

3. Press the down/up keys to change the setting.

4. While pressing down the SET key, press the shift key to move from the communication setting mode to the

PV/SV display mode.

5. To confirm the setting, restart the Temperature Controller.

 Setting Value

Add 1

bPS 960

bIT 8n1

• Parameters to be set vary depending on the Temperature Controller. Please refer to the manual of

the Temperature Controller for more details.